For distributors, fleet operators, and procurement managers entering the EV charging market, one of the most common misconceptions is that all electric car chargers are fundamentally the same. In reality, they are not. Chargers differ in power levels, connector types, communication protocols, safety certifications, and regional standards. Understanding these differences is essential for sourcing the right products for your target market.
This guide breaks down the key distinctions every B2B buyer needs to know.
The most basic difference lies in charging levels. EV chargers are classified into three tiers based on power output and charging speed:
| Spec | Level 1 | Level 2 | Level 3 (DCFC) |
| Input Voltage | 120V AC | 208–240V AC | 480V+ AC, 3-phase |
| Power Range | 1.2–2.4 kW | 3.3–19.2 kW | 50–350+ kW |
| Current Type to Vehicle | AC | AC | DC (feeds battery directly) |
| Typical Charge to 80% | 20–40 hours | 4–8 hours | 20–60 minutes |
Data source: Beny
Level 1 chargers plug into a standard household outlet and are suitable only for low-mileage drivers or plug-in hybrids. Level 2 chargers are the workhorse of both residential and commercial charging, offering a practical balance between speed and infrastructure cost. Level 3 — also called DC Fast Charging (DCFC) — bypasses the vehicle’s onboard charger and delivers DC power directly to the battery, enabling rapid charging along highways and at fleet depots.
The critical takeaway for B2B buyers: Level 2 and Level 3 chargers are fundamentally different products, not just variations of the same device. They serve different use cases, require different electrical infrastructure, and target different customer segments.
Even within the same charging level, connector types vary dramatically by region. A Level 2 charger sold in Europe will not physically fit a vehicle in North America without an adapter. This fragmentation is one of the biggest challenges in global EV charger sourcing.

According to Mordor Intelligence, CCS held 42.25% of the global EV charging connector market share in 2024, and NACS is expected to achieve a 22.06% CAGR through 2030. The global EV charging connector market is estimated at USD 3.3 billion in 2026 and is expected to reach USD 11.7 billion by 2034, growing at a CAGR of 17.1%.
Two chargers with identical physical connectors may still be incompatible due to differences in communication protocols.
IEC 61851 defines the AC charging communication standard, using Control Pilot (CP) and Proximity Pilot (PP) signals for handshake and connection detection. GB/T 18487 uses CC (Contact Confirmation) and CP signals, which differ from the IEC approach. For DC fast charging, CCS1 and CCS2 use PLC (Power Line Communication) protocols such as DIN70121 and ISO15118, while GB/T 20234 and CHAdeMO use CAN communication through dedicated pins.
For B2B buyers, this means a charger designed for the European market (CCS2/PLC) will not communicate with a Chinese-standard vehicle (GB/T/CAN) without significant hardware changes.
OCPP (Open Charge Point Protocol) is another critical differentiator. OCPP standardizes communication between charging stations and central management systems, enabling remote monitoring, load balancing, and billing functionality. OCPP 2.0.1 supports advanced features including dynamic smart charging, real-time grid-aware charging profiles, and native Plug-and-Charge (PnC) capabilities. A charger without OCPP support cannot be integrated into modern charging networks — a deal-breaker for commercial deployments.
Beyond connectors and protocols, the entire charging station must be certified to regional safety standards. In North America, chargers require UL 2594/2202 certification. In Europe, compliance with CE under the Low Voltage Directive (LVD) and EMC Directive is mandatory. In China, CCC certification is required.
Additional certifications such as TUV MARK, CB, UKCA, and RoHS are often required by specific markets or customers. For B2B buyers, verifying a supplier’s certification portfolio is a critical first step in the sourcing process.
Given the fragmentation in standards, connectors, and certifications, a one-size-fits-all sourcing strategy will not work. Here are the key considerations:
At Herye (Zhejiang Heye Cable Co., Ltd.), we manufacture EV charging solutions for global B2B buyers, including AC Level 2 wallbox chargers, portable chargers, and charging cable assemblies. Our products support multiple connector standards, including Type 2, GB/T, and NACS, with customized power ratings ranging from 3.5kW to 22kW.
Our charging solutions are certified with TUV MARK, CE, CB, UKCA, and CCC, and our manufacturing operations comply with IATF 16949, ISO 9001, ISO 14001, and ISO 45001 standards (IATF Certificate No.: 0600230). We offer flexible OEM/ODM services with customized branding, connector types, and packaging to meet your specific market requirements.
Ready to explore EV charging solutions for your market? [Contact our team] for a customized quote and product catalog.
This article is part of Herye’s Knowledge Center, providing industry insights for B2B buyers in the electrical connection and EV charging sectors.